轉職熱搜工作

【Responsibility】 - Wi-Fi/BT hardware team participate in Wi-Fi/BT design development and release design document. - Responsible for HW design, validation, integration and performance optimization in hardware team. - Collaborate with software, system, SOC, analog and algorithm team to complete reference board design. 【Requirement】 - 3~4+ years HW Engineering or related work experience with extensive lab experience and debugging capabilities. - Solid understanding Wi-Fi networks and IEEE802.11 stds. - WiFi/BT test knowledge and debug experience. - Comprehensive knowledge in RF circuit design/antenna design/PI and SI knowledge/interface knowledge like PCIe/SDIO/USB/I2S. - Comprehensive knowledge in using bench equipment (e.g. Wi-Fi tool tester, Oscilloscope, Spectrum analyzer, Network analyzer, …). - Good communication, documentation and interpersonal skills. - HFSS/ADS/Cadence Allegro and other PI/SI tool or Python is preferred. - Hands on lab debugging/measuring skills and characterization using Spectrum Analyzer, VSG, VSA, Network Analyzer & Power Meter. - Strong analytical problem-solving approach, good communication skills, self-motivated, cheerful and optimistic attitude. * * *Experience in at least one or more of following areas* * * 1. RF System, Microwave engineering, Antenna design, digital interface, Board tunning skill, etc. 2. Experience with wireless standards (WiFi/BT/5G/LTE/UMTS) and FCC/ETSI regulatory standard. 3. Knowledge and/or experience in MIMO, OFDM, CDMA. 4. PHY/MAC layer systems design, spectrum sharing, and next generation Wi-Fi. 5. Experience in performance analysis. ———————————————————— Ean Liu Email：ean.liu@manpowergrc.tw LINE ：@356gezfb

Job Overview o Wi-Fi hardware system team participate in Wi-Fi system design development and release. o Responsible for system design, validation, integration and performance optimization in hardware/system team. o Cover overall chip lifecycle development, including FPGA emulation, pre-silicon verification, AISC bring-up, AISC system performance tuning and customer support. o Collaborate with software, SOC, analog and algorithm team to develop new Wi-Fi features. Required Skills o 1-3 years Systems Engineering or related work experience with extensive lab experience and debugging capabilities. o Solid understanding Wi-Fi networks and IEEE802.11 stds. o Comprehensive knowledge in using bench equipment (e.g. Wi-Fi tool tester, Oscilloscope, Spectrum analyzer, Sniffer, …). o Good communication, documentation and interpersonal skills. o C/C++ programming. Preferred Skills o Experience in at least one or more of following areas: 1. Communication theory, signal processing, RF System, Microwave engineering, signal estimation and detection, automatic gain control, RF impairment estimation and correction, channel estimation, Power control, RF interfaces and digital mitigation of RF distortion, etc. 2. Experience with wireless standards (WiFi/BT/5G/LTE/UMTS) 3. Knowledge and/or experience in MIMO, OFDM, CDMA. 4. PHY/MAC layer systems design, spectrum sharing, and next generation Wi-Fi. 5. Experience in performance analysis and system level simulation. 6. Ability to program effectively in C/C++, Python and MATLAB. o Experience in verification on FPGA, system simulation is a plus. o Hands on lab debugging/measuring skills and characterization using Spectrum Analyzer, VSG, VSA, Network Analyzer & Power Meter. o Strong analytical problem-solving approach, good communication skills, self-motivated, cheerful and optimistic attitude. o Python/Perl/MATLAB/Shell script programming.

該公司為全球第一大IC設計公司，第一個產品和服務包括OmniTRACS衛星定位和傳訊服務，廣泛應用於長途貨運公司，和專門研究積體電路的無線電數字通訊技術。 Responsibilities： The role involves hands-on DVT evaluation of reference designs in a controlled environment, working closely with other DVT engineers and lab technicians, driving data gathering and consolidation, and presenting results to engineering teams. As part of the DVT team, the candidate will： - Utilize internal automation tools to verify system-level performance of WLAN reference designs - Conduct DVT entry reviews in preparation for DVT - Generate DVT exit review material and conduct data reviews for the engineering team - Generate DVT reports for internal and external customer release - Be responsible for the integrity of DVT data. Address discrepancies promptly and verify the solution - Contribute to internal DVT standards and procedures - Identify and enable new test capabilities using solid scripting/programming skills - Work with lab technicians to design and implement new test setups as needed - Provide timely feedback to the engineering teams about the progress and status of DVT Minimum Qualification： - Bachelors in EE. Fresh graduate or engineer with 0-3 years of industry experience - Good understanding of electronics engineering fundamentals, RF circuits, and RF performance metrics (Sensitivity, Intermodulation, Tx Power, ACLR, EVM, S-parameters) - Hands-on knowledge of RF instrument operation: Signal Generators, Spectrum Analyzers, Power meters, Network Analyzers etc. - Knowledge of statistical data processing using data analysis tools (Extensions, JMP, data power, etc.) - Basic programming (QDART tree) and debugging skills 此職缺為派遣職

該公司為全球第一大IC設計公司，第一個產品和服務包括OmniTRACS衛星定位和傳訊服務，廣泛應用於長途貨運公司，和專門研究積體電路的無線電數字通訊技術。 JD • The candidate needs to engage a team across geos and possesses solid knowledge of 802.11AX/BE MAC protocols, embedded systems, and testing infrastructure. • The job requires following the timeline strictly and having the capability of a fast turn-around for solutions to highly complex, challenging issues. • The responsibilities cover overall chip lifecycle development, including FPGA emulation for MAC mainly, involve with worldwide design team to complete the pre-silicon verification, ASIC bring-up for MAC/FW/Host, as well as system performance tuning and customer support. Qualification • Master’s degree in Engineering, Electronic Engineering, Computer Science, or a related field. • 2+ years of proven Firmware Engineering, IEEE802.11 MAC/PHY design, or related work experience. • Comprehensive understanding of IEEE802.11 MAC protocol design, including data transfer sequence, MSDU/MPDU/PPDU, CSMA/CA. Experience with 11AX/BE is a plus. • Linux/firmware/embedded-system design, kernel driver development. • Pre-silicon bring-up and verification. PHY layer experience is a plus. • Understanding of the ASIC verification process, and WIFI testing/issue analysis. IEEE Lab certification experience is a plus. • Source code management systems such as Perforce, and GIT. • Electrical Engineering or Computer Science/Networking • Solid understanding of WIFI networks and IEEE802.11 stds. • Solid knowledge of using bench equipment (e.g. oscilloscope, Litepoint tester, sniffer,…). • C/C++ programming skills. Python/Perl/Shell script is a plus. • Fluent English capability. 此職缺為派遣職，一年一簽

Skills/Experience： • With working experience in the class 1000 or higher level clean room. • With experience of equipment operation on the process equipment such as coater, printers, dispensers, cleaners, or ovens. • Or experience working on instrument operation as an optical microscope, surface profiler, or other electrical testing instrument. • Familiar with the tool operation principles, troubleshooting, and maintenance in the slit coater or photolithography, ACF bonder, COF bonder, and Resin laminator. • Good communication skills in both written and oral. Responsibilities： • Line operation Mon-Fri. AM9:00 to PM 6:00. • Daily tools startup, calibration, and setup for processes. • Tool troubleshooting and PM. • Process setup for the experiments and execution. • Data collection and/or basic analysis. • Mask/Screen design capability with CAD is a plus. 此職缺為派遣職，一年一簽

成立於1985年的美國IC設計公司為全球領先的無線技術創新者，也是 5G 開發、推出和擴展的驅動力，為知名手機品牌晶片設計，專門設計並販售可用於無線網路連線領域的半導體產品，提供優於勞基法福利，歡迎參考相關職缺。 ★生日禮金：1000元 ★新年獎金：2000元 ★端午獎金：1000元 ★中秋獎金：1000元 ★特休優於勞基法：第一年給予七天特休假 / Job Overview / - Test planning, test case development and execution. This includes hands-on testing with various mobile/laptop/router wifi/BT products in lab and in the field. - Test case automation and maintenance. - Must be capable of prototyping, reworking, and soldering small electronic components such as resistors, capacitors, inductors, jumper-wiring, etc. in a clean method utilizing conventional lab techniques. - During chip development, power consumption and system performance verification analysis. - Collaborate with software, hardware, system team to verification new Wi-Fi features. / Required Skills / - familiar with power converter ( SMPS , LDO , PMIC ) - Ability to understand spreadsheets, schematics, layout, component datasheets, BOM parts list, etc - Familiar with TCP/IP protocol and Wi-Fi network concepts. - Comprehensive knowledge in using bench equipment (e.g. Wi-Fi tool tester, Oscilloscope, Spectrum analyzer, Sniffer, …). - Knowledge of computer programming fundamentals (Python/Perl/Shell). - Experience in Windows and Linux/IOS/Android operating system. - Experience with wireless standards (WiFi/BT) - Analytical problem-solving approach, good communication skills, self-motivated, cheerful and optimistic attitude. / Preferred Skills / - Knowledge and/or experience in MIMO, OFDM, CDMA. - ands on lab debugging/measuring skills and characterization using Spectrum Analyzer, VSG, VSA, Network Analyzer & Power Meter.

該公司為全球第一大IC設計公司，第一個產品和服務包括OmniTRACS衛星定位和傳訊服務，廣泛應用於長途貨運公司，和專門研究積體電路的無線電數字通訊技術。 Role and Responsibilities： With the approaching and widespread of WIFI technology, we are actively seeking talented engineers who will be responsible for system design, validation, and optimization in the hardware/system team. As a member of the WIFI Hardware System team, you will participate in Wi-Fi system design, development, validation, integration, and performance optimization. The responsibilities cover overall chip lifecycle development, including FPGA emulation, pre-silicon verification, ASIC bring as well as system performance tuning and customer support. You will need to collaborate with SOC, analog, and algorithm teams to develop new Wi-Fi features. Requirements Minimum Qualifications: Master‘s degree in Engineering, Electronic Engineering, Computer Science, or related field. Systems Engineering or related work experience with extensive lab experience and debugging capabilities. Good team communication, documentation, and interpersonal skills. Preferred Qualifications: Experience in at least one or more of the following areas: o Communication theory, signal processing, RF Systems, Microwave engineering, signal estimation and detection, automatic gain control, RF impairment estimation and correction, channel estimation, Power control, RF interfaces and digital mitigation of RF distortion, etc. o Experience with wireless standards (WiFi/BT/5G/LTE/UMTS) o Knowledge and/or experience in MIMO, OFDM, CDMA o PHY/MAC layer systems design, spectrum sharing, and next-generation WiFi. o Experience in performance analysis and system-level simulation. o Ability to program effectively in C/C++, Python, and/or Matlab. - Experience in verification on FPGA, and system simulation is a plus. - Hands-on lab debugging/measuring skills and characterization using Spectrum Analyzer, VSG, VSA, Network Analyzer & Power Meter. -Strong analytical problem-solving approach, good communication skills, self-motivated, cheerful, and optimistic attitude. 此職缺為派遣職，一年一簽

職責要求 1. Responsible for the design and simulation of 5G Small Cell RF circuit 2. RF circuit design, including schematic/layout 3. RF system architecture evaluation 4. RF related calibration calculation evaluation 5. RF certification and debugging 6. Support production line 任職資格 具以下相關經驗者優先 1. Massive MIMO 2. Hight power : ＞=5W per channel 3. 手機RF

職責要求 1. Be responsible for software design and development of embedded system for Automotive products 2. Implement Application/BSP/Driver/Firmware programming in C, C++ and C# languages on Linux or Windows platform 3. Experienced in RF (4G/5G/GNSS/BT/WIFI etc.), Ethernet AVB, Analog/Digital Radio and MIPI-CSI/DSI software development/test is a plus. 4. Perform process activities in accordance with Automotive standards such as IATF16949, VDA6.3, ISO26262, ISO/SAE21434 and ASPICE 任職資格 1. 熟悉Linux BSP，驅動程式開發、移植及除錯或Windows應用程式開發，三年以上軟體開發經驗 2. 具備無線通訊、車用網路、數位廣播、影像處理等軟體開發及測試經驗者佳 3. C, C++, C# 程式語言,熟悉Linux系統架構與操作 4. 車用電子軟體相關經驗者尤佳

職責要求 1.射頻硬體線路設計及PCB佈局設計檢討,產品驗證及偵錯 2.無線對講機及其他通訊如NFC, SUB 1G及BT等相關領域技術設計。 3.熟悉產品開發所屬技術領域。 4.業務相關技術協助。 5.其他交辦事項。 任職資格 1.熟悉Altium Designer, Cadence Orcad或Mentor Graphics尤佳。 2.具通訊理論尤佳 3.具天線及射頻經驗佳 4.擅長工具 EDA