轉職熱搜工作

1.有壓力容器製作及配管經驗,會使用天車吊裝組立大型桶槽、塔槽 2.會使用氧乙炔或Plasma切割,簡易車床.鑽孔等現場工作 3.看懂壓力容器的圖面,有視圖能力,會按圖施作 4.熟捻壓力容器製作，需有三年以上經驗。 5.要有普通小型車駕照,會開手排車 6.須能接受偶而外派及出差作業 (有獎金津貼) 7. 有現場管理經驗者為佳

1.Responsible for the design, R&D, and verification of robot structures and transmission systems, particularly for robotic arms, end-effectors, and joint modules. 2.Assist the department head in the mechanical design and validation of robots (including arms, AMRs, and main body structures). Perform mechanical configuration, component selection, modeling, and 2D/3D drawing creation based on product requirements. 3.Support dynamic simulation and inverse kinematics analysis to assist control and software teams in performance optimization. 4.Participate in prototype fabrication, machining and supplier communication, assembly, and testing; provide design improvement recommendations. 5.Conduct innovative design and implementation of new materials and mechanical structures based on technological development directions.

1.廠區內生產線設備之電控與機械維修。 2.公用系統（水、電、氣及空調等）之日常巡檢保養維護。 3.冷凍冷藏空調系統維修保養。 4.機台保養維修。 5.鍋爐及廢水操作。 6.其他主管交辦事項。

1.擬定及實施空氣污染防制及改善計畫。 2.監督空氣污染防制設施或監測設施之正常運作，並保存相關資料。 3.擬定、實施突發事故之緊急應變措施，演練規劃及教育訓練。 4.辦理固定污染源設置、變更及操作許可證之申請，及環保類申報。 5.監督公私場所依許可證內容設置、變更及操作。 6.擬定、實施排放管道及周界空氣污染物之檢測作業，並分析與保存檢測報告相關資料。 7.監督採樣設施之設置、檢查及維護保養，包含採樣孔、安全採樣平台、扶梯及其他應符合檢查鑑定公私場所空氣污染物排放狀況之採樣設施規範事項。 8.廢棄物清除處理事宜安排與規劃 9.內部/外部(政府、客戶)稽核對應 10.ISO14001環境管理系統廠區運作 11.其他有關空氣污染防制及環保相關應辦理事項。

Key Responsibilities: • Implement V&V process to measure and analyze AI inference performance: accuracy, false positive, false negative, precision, recall, .. etc. Find out and identifying bottlenecks in the AI modules. • Compliance with test specifications to implement integration test and system test for AI module • Validate AI inference engine performance and stability across different embedded runtimes (e.g., TensorRT, SNPE, ONNX Runtime). • Utilize Linux profiling tools and vendor-specific monitors to analyze CPU, GPU, and NPU load during sustained inference tasks. • Perform stress and reliability testing on inference modules to detect memory leaks, OOM (Out of Memory) issues. • Develop automated performance benchmarking scripts to ensure consistent validation across different software versions and hardware revisions. • Collaborate with hardware and software development teams to identify and resolve system-level bottlenecks and hardware-software integration issues. • Ensure alignment with automotive standards such as: ASPICE (Automotive SPICE), ISO 26262 (Functional Safety), ISO 21448 (SOTIF), OEM-specific requirements (Toyota, Honda, VW, GM, etc.)

【Key Responsibilities】: • Develop and maintain the QA strategy for assigned SW projects in coordination with Quality Manager • Create, maintain and ensure the execution of the QA Plan for the project • Define, monitor and report quality KPIs at SW and ML model level • Prepare the quality status report highlighting non-conformities and quality risks to project management • Define escalation process to ensure identified non-conformities are addressed and resolved effectively • Perform internal gap analysis at SW and ML level to assess compliance with A-SPICE processes • Conduct work product reviews, audits and process compliance checks within the project • Collaborate with engineering and supply chain teams to resolve quality-related issues and implement corrective and preventive actions • Support project teams in preparing for internal and/or external ASPICE assessments for SW and ML • Facilitate lessons learned sessions and collaborate closely with software and ML engineering teams to implement A-SPICE process improvements and ensure alignment with functional safety standards • Ensure proper documentation and traceability across the development lifecycle, particularly for the SUP.1 process • Support the definition and refinement of the Product Development Process in alignment with organizational and project-specific quality requirements • Serve as the quality interface with Mandarin-speaking engineering teams and OEM counterparts, facilitating alignment on quality requirements and findings

Key Responsibilities: • Prepare and execute test plans on vehicles, test benches, or simulation environments. • Install and configure data logging equipment and sensors (e.g., cameras, LiDAR, radar, IMU, GPS, CAN loggers). • Conduct real-world and controlled environment driving sessions for data collection. • Verify and validate data quality, ensuring synchronization and integrity across all sensors. • Support engineers by capturing datasets required for algorithm development, calibration, and validation. • Maintain test vehicles and equipment, including firmware updates and calibration of sensors. • Document test procedures, data collection logs, and findings in a structured format. • Collaborate with engineering and software teams to define data needs and improve collection strategies. • Adhere to safety standards and procedures during all test activities. • Create test cases traced to the system functionality requirements and to the system architecture. • Create the test environment (bench and vehicle) and perform the tests according to the test requirements (including equipping the vehicle with various sensors and tools)

SMT (PCBA) 1. Oversee QA operations, including inspections, supplier management, root cause analysis, and product reliability. 2. Develop and maintain quality management systems, including training programs. 3. Lead internal audits and external certifications (such as ISO, SPC...etc) for compliance with industry standards. 4. Drive quality improvement initiatives and manage customer complaints with preventive measures. 5. Engage clients through regular quality meetings and action plans. 6. Lead and develop the QA team, fostering accountability and continuous improvement. 7. Performs other related duties as assigned.

SMT (PCBA) 1. NPI project development, feasibility analysis and evaluation for test related issues (capacity, process, PFMEA, DFX, equipment, fixtures, automation...etc) 2. ICT, BFT fixture development, test script coding and test plan development 3. Set up and optimize the testing station/process for NPI and mass production 4. SOP standard document creation & production line staff training 5. Leading the analysis, verification, and resolution the testing issue troubleshooting 6. Assist the production department and quality department in improving the testing yield rate. 7. Validation and implementation of ECN/ECR Firmware and Hardware changes of testing related issues 8. Improvement of testing production processes, efficiency enhancement, and cost savings. 9. Performs other related duties as assigned.

1.繪出製模專用的成型品圖、模具草圖、模具組立結構圖 2.依據3D圖面，進行樣品或成品圖面分析及製模條件規劃 3.產品及模具估價、產品發包及試模事務 4.評估新模具開發之可行性 (如: 開發前規劃、模具成本估計分析) 5.規劃必要作業程序以製造工具或模具